Gaugemaster OPTI Decoders

For those that like their electrickery delivered digitally...
Post Reply
tunnelmotor
Posts: 110
Joined: Fri Jul 03, 2009 7:05 pm

Gaugemaster OPTI Decoders

Post by tunnelmotor »

I have just discovered Gaugemaster's OPTI decoders - bought three at the Ally Pally from Digitrains and fitted them all - they look like Digitrax DH123s or TCS T1s - have a 9-pin socket and come with a 9-pin plug and 8-pin socket lead.

Installation and programming manual on gaugemaster.com in the downloads section. They are four function and the instructions on programming are very clear - the best I have seen. I managed to programme the third function for a beacon on the roof of an Athearn RTR SW1500 to create a pulsing effect on CV51. So far so good.
Post Reply